About Depth Gauge Boards

Our Boards

For inland and tidal locations to indicate water depth.  Available in :

  •  standard
  • bespoke
  • reflective

For added safety.  Full spec. sheet available.

Depth Gauge Boards are manufactured from aluminium panels which have a print applied and encapsulated by a stove process.

A full technical data sheet is available on request.

Our boards are :

Resistant to UV, salt water, airborne elements, impact and abrasion.

Gloss surface – to impede algae growth. Satin finish available.

Antimicrobial coating can be added, which significantly reduces algae growth and makes cleaning easier.

We offer:

Freshwater 1m x 150mm.

Tidal/salt water 1m x 300mm

Bespoke size and design boards.

Conventional graduation marking – ascending or descending and incline boards.

Depth numerals can be either either printed on the boards or purchased as individuals and applied to the boards giving maximum flexibility.

All boards are available in 3 finishes.

Standard

Reflective

Bespoke

BESPOKE DEPTH GAUGE BOARDS

We offer all boards with the traditional red print water depth marking and a design which allows the board to be read in the dark by an infrared camera.

Additional to our “traffic light” boards we can accommodate your water height marking requirement and if appropriate safety messages or company branding.

NEW PRODUCT DEVELOPMENT

Last year proved an interesting year for our new product development, resulting in the launch of a new ANTIMICROBIAL coating which severely reduces algae growth & makes for easier cleaning of the boards.

After a successful 16-month trial we are pleased to offer antimicrobial protection on any board.

This is what our client told us about the antimicrobial trial...

 The boards that you supplied us with last year have proven very successful. We have a number of them in place for over a year and the algae build up that we had been experiencing on conventional boards is no longer an issue.  The antimicrobial coating has greatly reduced the amount of cleaning required and when we do clean the boards it requires much less effort. The porous nature of conventional boards allowed algae to become embedded in the board whereas this is not an issue with the enamel like coating on the boards you supplied. The markers and numerals on the board are clear an legible; we have received a lot of positive feedback from each of our gauge readers.

Armacrusha Power Station, Ireland

Following on from our antimicrobial boards came our design change to allow our boards to be read in the dark by  infrared cameras.

After identifying that the red water height markings were not picked up by infrared cameras, we talked about other options to identify how we could overcome the problem and come up with a clear  winner.

SPOT THE DIFFERENCE...

Use the left and right slider below compare normal and infrared cameras

Our Nationwide Installation System

Our systems comes with several advantages over other systems, including:

Bracket for wall or hard surface mounting.

Connector channel for connecting multiple boards onto Uni Strut post channel.

Uni Strut post channel available in 1m, 2m and 3m lengths.

Gauge Board Installation

Boards can be mounted using multiple screws or using our bracket system saving time and money offering the following benefits :

No need to wait for water draw down conditions as the brackets are mounted above the waterline and when the boards are attached almost any length of board can lowered into the water .

The brackets are fitted vertically and can be adjusted for surface irregularities.

If a board needs replacing the bracket stays attached to the surface and the gauge board length can be removed and replaced in little time at all , fitting back onto the bracket – no further drilling required.

The Uni Strut channel post and board connector allow the depth gauge boards to be mounted into embankments and dry structures at flood storage reservoirs.

OUR DEPTH GAUGE INSTALLATION GUIDE

We’ve put together a great guide for you to take the effort out of installing your depth gauge boards.  Get it here.

Enter your keyword